LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater Systems >> Removal & Installation >> Temperature Door >> Removal

Temperature Door: Removal

  1. Remove the HVAC module. Remove screws in order to split the HVAC module in half. See Figure. Disconnect the air temperature electrical actuator.
  2. Remove the air temperature actuator screws. Remove the air temperature actuator. Remove the vacuum harness from the mode actuator. Remove the mode actuator rod retaining clip.
  3. Remove the mode actuator rod from the mode door lever. Remove the mode actuator. Remove the air temperature door from the lower module half.
scientia non olet · About LEMON Manuals