LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater Systems >> Removal & Installation >> HVAC Control Assembly >> Removal

HVAC Control Assembly: Removal

  1. Remove the left instrument panel sound insulator. Remove the knee bolster trim panel. Remove the instrument cluster trim plate. See appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT.
  2. Remove the HVAC control assembly retaining screws. Depress the HVAC control assembly retaining tabs and remove the HVAC control assembly from the instrument panel. See Figure. Disconnect the vacuum harness connector from the HVAC control assembly. Disconnect the electrical connectors from the HVAC control assembly.
scientia non olet · About LEMON Manuals