Diagnostic System Check
- Did you review DIAGNOSTIC STARTING POINT ? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT .
- Install a scan tool. Does the scan tool power up? If so, go to next step. If not, see appropriate SELF-DIAGNOSIS article in ENGINE PERFORMANCE.
- Turn ignition on. Attempt to establish communication with the PCM. Does the scan tool communicate with the PCM? If so, go to next step. If not, see appropriate SELF-DIAGNOSIS article in ENGINE PERFORMANCE.
- Select the PCM display DTCs function on the scan tool. Does the scan tool display any DTCs? If so, go to next step. If not, see SYMPTOM DIAGNOSIS .
- Does the scan tool display any DTCs which begin with a "U"? If so, see appropriate SELF-DIAGNOSIS article in ENGINE PERFORMANCE. If not, go to next step.
- Does the scan tool display DTC P0530? If so, see appropriate MANUAL A/C-HEATER SYSTEMS article. If the scan tool display any other DTCs, see appropriate SELF-DIAGNOSIS article in ENGINE PERFORMANCE.