LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case - NVG 236/246-NP8 (Two-Speed Automatic) Service) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise the vehicle. Refer to LIFTING & JACKING THE VEHICLE in General Information.
  2. Remove the transfer case from the vehicle. Refer to Transfer Case Assembly Replacement .
  3. Remove the transfer case input shaft seal.
    Fig 1: Removing Transfer Case Input Shaft Seal
    G01671254Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals