LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case - NVG 236/246-NP8 (Two-Speed Automatic) Service) >> Diagnostic Information and Procedures >> DTC C0376: Vehicle Speed On Class 2 Data Bus >> Circuit Description

Circuit Description

WARNING: This page is about a different variant/trim than selected.

The front and rear propshaft speed sensor is a permanent magnet (PM) generator. The PM generator produces a pulsing AC voltage. The AC voltage level and number of pulses increases as speed increases. The module converts the pulsating AC voltage to a propshaft RPM which is used for calculations. The module only looks at these inputs together when the vehicle is in 4H, 4L, and AUTO 4WD range only. The propshaft RPM can be displayed with a scan tool.

This DTC detects greater than 20 percent difference in the speed sensor inputs.