Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Backup Lamp Switch | 37 N.m | 27 lb ft |
| Clutch Actuator Bolt | 8 N.m | 71 lb in |
| Clutch Housing Cover Bolts | 14 N.m | 10 lb ft |
| Front Bearing Retainer Bolts | 14 N.m | 10 lb ft |
| Oil Drain and Fill Plugs | 30 N.m | 22 lb ft |
| Shift Boot Screws | 2 N.m | 18 lb in |
| Shift Housing to Transmission Bolts | 20 N.m | 15 lb ft |
| Shift Lever Adjusting Nut | 48 N.m | 35 lb ft |
| Transmission-to-Engine Studs and Bolts | 47 N.m | 35 lb ft |
| Transmission Mount Bolt | 50 N.m | 37 lb ft |
| Transmission Mount Nut | 50 N.m | 33 lb ft |
| Transmission Mount to Crossmember Nut | 45 N.m | 33 lb ft |
| Transmission Mount to Transmission Bolt | 50 N.m | 37 lb ft |
| Vehicle Speed Sensor Bolt | 16 N.m | 12 lb ft |