LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission Servicing) >> Lubrication >> Checking Fluid Levels >> Transmission

Checking Fluid Levels: Transmission

WARNING: This page is about a different variant/trim than selected.
  1. Raise and suitably support the vehicle. Ensure the vehicle is level. Clean any dirt from around the fill plug. Remove the transmission fill plug from the transmission. See Fig 1 and Fig 2 .
  2. Ensure transmission fluid level is even with the bottom of the fill plug hole. Add appropriate fluid, if necessary. See RECOMMENDED FLUIDS .
  3. Install the transmission fill plug and tighten to specification. See TORQUE SPECIFICATIONS . Lower the vehicle.
Fig 1: Removing & Installing Oil Fill Plug (NV1500)
G00102992Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Oil Fill Plug (NV3500)
G00102990Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals