LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Automatic Transmission - ALLISON (Introduction, Service & Replacement)) >> Repair Instructions >> Heat Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
  2. Remove the front heat shield bolts (2).
  3. Remove the front heat shield (1).
    Fig 1: Removing Heat Shields
    GM744180Courtesy of GENERAL MOTORS CORP.
  4. Remove the side heat shield bolt (4) and nut (5).
  5. Remove the side heat shield (3).
scientia non olet · About LEMON Manuals