LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Transfer Case - NVG 246-NP8) >> Repair Instructions >> Transfer Case Adapter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Support the transmission with a suitable jack stand.
  3. Remove the transmission mount nuts.
    4. Fig 1: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  4. Remove the crossmember bolts.
  5. Remove the crossmember.
    6. Fig 2: Identifying Crossmember & Bolts
    GM652595Courtesy of GENERAL MOTORS CORP.
  6. Remove the transmission mount bolts.
    7. Fig 3: Removing Transmission Mount Bolts
    GM715661Courtesy of GENERAL MOTORS CORP.
  7. Remove the transmission mount.
    8. Fig 4: View Of Transmission Mount
    GM648001Courtesy of GENERAL MOTORS CORP.
  8. Remove the transfer case adapter bolts.
  9. Remove the transfer case adapter.
  10. Remove the transfer case seal.
    11. Fig 5: View Of Transfer Case Adapter, Bolts & Seal
    GM652614Courtesy of GENERAL MOTORS CORP.
  11. Remove the transfer case gasket, if necessary.
    12. Fig 6: View Of Transfer Case Gasket
    GM654219Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals