LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 994 (HVAC Systems - Manual) >> Repair Instructions >> Air Temperature Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the IP insulator. Refer to Insulator Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
    2. Fig 1: Identifying Electrical Connectors
    GM372310Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (8) from the air temperature actuator (9).
  3. Remove the air temperature actuator retaining screws.
    Fig 2: Air Temperature Actuator Retaining Screws
    GM363779Courtesy of GENERAL MOTORS CORP.
  4. Remove the air temperature actuator.
    Fig 3: Air Temperature Actuator
    GM363780Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals