LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 990 (Theft Deterrent System) >> Diagnostic Information and Procedures >> Security Indicator Always On or Flashing

Security Indicator Always On or Flashing

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Security Indicator Always On or Flashing

Step Action Yes No
Schematic Reference: Theft Deterrent System Schematics 
Connector End View Reference: Theft Deterrent System Connector End Views 
1 Did you perform the Theft Deterrent Diagnostic System Check? Go to Step 2  Go to Diagnostic System Check - Theft Deterrent 
2
  1. Turn ON the ignition with the engine OFF.
  2. With the scan tool, command the Security indicator ON and OFF.
Does the Security indicator turn ON and OFF with each command?		 Go toTesting for Intermittent Conditions and Poor Connections in Wiring Systems Go to Step 3 
3 Replace the Instrument Cluster. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console.
Did you complete the replacement?		 Go to Diagnostic System Check - Instrument Cluster in Instrument Panel, Gages and Console -
scientia non olet · About LEMON Manuals