LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Shift Interlock Systems) >> Removal & Installation >> Floor Shift Knob >> Installation

Floor Shift Knob: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Install the knob and boot assembly onto the transmission control (4). Engage the locking tabs (2) with the console assembly. See Fig 1 . Tighten the control knob set screw (1 or 3) to 18 INCH lbs. (2 N.m).

Fig 1: Removing & Installing Floor Shift Knob
G00102981Courtesy of GENERAL MOTORS CORP.