Erasing Channels
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
To erase programmed channels, hold down the 2 outside buttons until the light on the GDO transmitter begins to flash. Individual channels cannot be erased, but can be reprogrammed using the Garage Door Opener Programming and the Training GDO for Rolling Code Receivers procedures.
Non-Compatible Garage Door Openers
| Manufacturer | Model Number |
|---|---|
| Chamberlain | G-3467 |
| Click Card | ATDG-90 |
| Genie | AR-55 |
| Genie | AR-30 |
| Linear | Code Red |
| Linear | Moore-o-matic |
| Linear | DX Format |
| Micom | Safeway |
| Pulsar/Allister | 20 |
| Skylink | Skylink |
| Stanley | 1048 |
| Stanley | 1054 |
| Stanley | 1064 |
| Telectron | T-22A |
| Telectron | T-80 |
| Telectron | T-80G |
| Telectron | TP-21 |