LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Replacement - Rear (60/40 Split) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front and the rear leg trim covers.
  2. Remove the seat back recliner handle screw from the trim panel, if equipped.
  3. Remove the jack assembly, if required.
  4. Remove the covers in order to access the seat bolts.
  5. Disconnect the electrical connectors, if equipped.
  6. Remove the seat retaining bolts.
  7. Remove the seat from the vehicle.
    8. Fig 1: Removing Rear Seat (60/40 Split)
    GM276317Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals