LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Cushion Heater Element Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: If the passenger seat cushion foam is damaged when you remove the heater element, replace the passenger presence system in order to prevent personal injury.
  1. Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Remove the seat cushion trim cover. Refer to Seat Cushion Trim Cover and Pad Replacement .
  3. Peel the seat cushion heater off of the pad.
    4. Fig 1: Peeling Seat Cushion Heater Off Pad
    GM411299Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the seat cushion heater wiring harness.
scientia non olet · About LEMON Manuals