LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat cushion trim cover (8) and the pad (7). Refer to Seat Cushion Cover and Pad Replacement - Rear .
    2. Fig 1: Removing Rear Seat Cushion Trim Cover & Pad
    GM276326Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts from the hinge assembly, if equipped with folding seats.
  3. Remove the seat cushion frame (5).
    4. Fig 2: Removing Seat Cushion Frame
    GM833284Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals