LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat cushion frame (5).
    2. Fig 1: Installing Seat Cushion Frame
    GM833284Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the hinge assembly, if removed.

    Tighten:  Tighten the bolts to 35 N.m (26 lb ft).

  3. Install the seat cushion trim cover (8) and the pad (7). Refer to Seat Cushion Cover and Pad Replacement - Rear .
    4. Fig 2: Installing Rear Seat Cushion Trim Cover & Pad
    GM276326Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals