LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  2. Remove the seat cushion trim cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
  3. Remove the following components from the seat cushion frame:
    • The frame springs (1)
    • The frame suspension (2)
    • The plastic retainers (3)
    4. Fig 1: View Of Lumbar Cable And Front Seat Cushion Frame Components
    GM407184Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat cushion frame from the vehicle.
scientia non olet · About LEMON Manuals