LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Back Latch Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat from the vehicle. Refer to Seat Replacement - Rear (Extended Cab w/4th Door) , Seat Replacement - Rear (Extended Cab)  or Seat Replacement - Rear (60/40 Split) .
  2. Remove the armrest, if equipped. Refer to Armrest Replacement - Rear Seat (60/40 Split) .
  3. Remove the seat back cover. Refer to Seat Back Cover and Pad Replacement - Rear .
  4. Remove the bolts (1,2) that retain the latch assembly to the seat frame.
    5. Fig 1: Removing Rear Seat Back Latch
    GM833297Courtesy of GENERAL MOTORS CORP.
  5. Unsnap the recliner cables from the folding mechanism.
  6. Remove the seat back latch assembly from the seat frame.
scientia non olet · About LEMON Manuals