LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Back Latch Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back latch assembly to the seat frame.
  2. Attach the recliner cables to the folding mechanism.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts (1,2) that retain the latch assembly to the seat frame.

    Tighten:  Tighten the bolts to 45 N.m (33 lb ft).

    4. Fig 1: Installing Rear Seat Back Latch
    GM833297Courtesy of GENERAL MOTORS CORP.
  4. Install the seat back cover. Refer to Seat Back Cover and Pad Replacement - Rear .
  5. Install the armrest, if equipped. Refer to Armrest Replacement - Rear Seat (60/40 Split) .
  6. Install the rear seat to the vehicle. Refer to Seat Replacement - Rear (Extended Cab w/4th Door) , Seat Replacement - Rear (Extended Cab)  or Seat Replacement - Rear (60/40 Split) .
scientia non olet · About LEMON Manuals