LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from the vehicle. Refer to Seat Replacement - Rear (Extended Cab w/4th Door) , Seat Replacement - Rear (Extended Cab)  or Seat Replacement - Rear (60/40 Split) .
  2. Remove the armrest, if equipped. Refer to Armrest Replacement - Rear Seat (60/40 Split) .
  3. Partially remove the seat-back cover in order to gain access to the retaining bolts. Refer to Seat Back Cover and Pad Replacement - Rear .
  4. Remove the bolts from the seat-back frame.
  5. Remove the seat-back frame (4) from the seat back cushion frame.
    6. Fig 1: Removing Rear Seat Back Frame
    GM276335Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals