LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Heated Seat Switch Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the switch to the console panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the retaining screw.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  3. Connect the electrical connector.
    4. Fig 1: Rear Heated Switch Electrical Connector
    GM752597Courtesy of GENERAL MOTORS CORP.
  4. Install the center console end panel. Refer to Center Console End Panel Replacement in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals