LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Seat System) >> Repair Instructions >> Head Restraint Retainer Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the head restraint retainers by pressing into the seat back frame until the retaining tabs snap into place at the bottom of the frame opening.
    2. Fig 1: Installing Head Restraint Retainers
    GM409498Courtesy of GENERAL MOTORS CORP.
  2. Position the cardboard panel to the seat back frame and install the panel fasteners.
    3. Fig 2: View Of Seat Belt Tower Cover/Panel Bolt
    GM378543Courtesy of GENERAL MOTORS CORP.
  3. Install the seat back trim cover. Refer to Seat Back Cover and Pad Replacement - Front .
scientia non olet · About LEMON Manuals