Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: When installing the ESB trim cover ensure that the cover is positioned behind the 120V outlet faceplate.

Install the ESB trim cover.
Install the plastic pushpin retainers to the ESB trim cover (1).

Fig 1: View Of ESB Trim Cover Retainers (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.

Lower the rear seat.