LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Battery, Charging System & Starting System) >> Repair Instructions >> Energy Storage Box (ESB) Temperature Sensor Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the energy storage box (ESB) intermediate cover. Refer to Energy Storage Box (ESB) Intermediate Cover Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the tie strap.
  3. Disconnect the temperature sensor electrical connector.
  4. Remove the temperature sensor screw (1).
  5. Remove the temperature sensor (2) from the ESB battery.
    6. Fig 1: View Of Temperature Sensor & Screw (5.3L Engine w/RPO HP2)
    GM893299Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals