LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Battery, Charging System & Starting System) >> Repair Instructions >> Energy Storage Box (ESB) Service Disconnect Power Cable to Fuse Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the service disconnect power cable. Refer to Energy Storage Box (ESB) Service Disconnect Power Cable Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the maxi-fuse. Refer to Energy Storage Box (ESB) Maxi-Fuse Replacement (5.3L Engine w/RPO HP2) .
  3. Cut the tie straps securing the power cable to the energy storage box (ESB).
  4. Remove the service disconnect power cable nut at the service disconnect switch.
    5. Fig 1: View Of Service Disconnect Switch Power Cable & Nut (5.3L Engine w/RPO HP2)
    GM1403629Courtesy of GENERAL MOTORS CORP.
  5. Remove the service disconnect power cable from the fuse holder and service disconnect switch.
scientia non olet · About LEMON Manuals