LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Battery, Charging System & Starting System) >> Repair Instructions >> Energy Storage Box (ESB) Service Disconnect Power Cable Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the energy storage box (ESB) intermediate cover. Refer to Energy Storage Box (ESB) Trim Cover Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the service disconnect power cable nuts (1) from the high current connector (HCC) and the service disconnect switch.
  3. Remove the service disconnect power cable (2) from the HCC and service disconnect switch.
  4. Fig 1: View Of Service Disconnect Power Cable & Nut (5.3L Engine w/RPO HP2)
    GM1403628Courtesy of GENERAL MOTORS CORP.