LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Battery, Charging System & Starting System) >> Repair Instructions >> Energy Storage Box (ESB) Sensor Carrier Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the high current sensor. Refer to Energy Storage Box (ESB) High Current Sensor Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the high current sensor carrier nut.
  3. Remove the high current sensor carrier.
    4. Fig 1: View Of High Current Sensor Carrier & Nut (5.3L Engine w/RPO HP2)
    GM1403625Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals