Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the high current sensor carrier.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the high current sensor carrier nut.
Tighten: Tighten the nut to 10 N.m (89 lb in).

Fig 1: View Of High Current Sensor Carrier & Nut (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.

Install the high current sensor. Refer to Energy Storage Box (ESB) High Current Sensor Replacement (5.3L Engine w/RPO HP2) .