Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the maxi-fuse (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the maxi-fuse nuts (1).
Tighten: Tighten the nuts to 10 N.m (89 lb in).

Fig 1: View Of Maxi-Fuse & Nuts (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.

Install the maxi-fuse cover.

Fig 2: View Of Maxi-Fuse Cover (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.

Install the ESB intermediate cover. Refer to Energy Storage Box (ESB) Trim Cover Replacement (5.3L Engine w/RPO HP2) .