Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the energy storage box (ESB). Refer to Energy Storage Box (ESB) Service Disconnect/Connect (5.3L Engine w/RPO HP2) .
Remove the ESB intermediate cover. Refer to Energy Storage Box (ESB) Intermediate Cover Replacement (5.3L Engine w/RPO HP2) .
Disconnect the appropriate battery resistor electrical connector (1).

Fig 1: View Of Battery Resistor Electrical Connector (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.

Remove the appropriate battery power cable nut (4) and cable (5).
Remove the appropriate battery resistor connector (2).

Fig 2: View Of Battery Resistor Connectors, Power Cable & Nut (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.