LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Battery, Charging System & Starting System) >> Repair Instructions >> Energy Storage Box (ESB) 120V Receptacle Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the receptacle face plate. Refer to Energy Storage Box (ESB) 120V Receptacle Face Plate Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the receptacle outlet screws (2).
  3. Remove the receptacle outlet (3) from the receptacle box (1).
  4. Fig 1: View Of Receptacle Box, Outlet & Screws (5.3L Engine w/RPO HP2)
    GM1343151Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the receptacle electrical connections.