Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and battery cable end.

Install the negative battery cable.
NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: View Of Auxiliary Battery & Cables

Courtesy of GENERAL MOTORS CORP.

Tighten the negative battery cable bolt.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).