Circuit Description

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The inflatable restraint I/P module disable switch circuit consists of an I/P module disable switch, I/P module disable switch indicator, I/P module disable switch signal circuit, and I/P module suppression indicator control circuit. When the ignition is turned ON, the inflatable restraint passenger presence system (PPS) module performs tests to diagnose critical malfunctions within itself. The PPS will set flash diagnostic trouble codes (DTCs) if a fault is detected. The PPS will also notify the SDM of a fault. The SDM will respond by setting either DTC B0092 or B0098 and requesting the instrument panel cluster (IPC) to turn ON the AIR BAG indicator. The PPS module monitors the voltage levels at the I/P module disable switch signal and the I/P module suppression indicator control circuits to determine the position of the I/P module disable switch. If a malfunction is detected, the PPS will set DTC 033.