DTC P0251: Injection Pump Cam System: Description
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The optical sensor provides a pump cam signal to the Powertrain Control Module (PCM) by counting the pulses from the sensor that monitors slots on the data track disk that is located inside the injection pump. The pump cam is one of the most important PCM inputs for fuel control and timing. This test monitors the number of crankshaft position pulses that have occurred since the last cam pulse. The physical one-to-one correspondence between the pump cam and the crankshaft implies that if more crank pulses than cam pulses are detected, the cam pulses have been missed.