LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Manual Transmission Clutch System) >> Repair Instructions >> Release Bearing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission. Refer to:
    Fig 1: Clutch Release Bearing
    GM71484Courtesy of GENERAL MOTORS CORP.
  2. Remove the clutch release bearing.
    • Rotate the bearing in either direction
    • The compression spring load will push the release bearing off the end of the clutch actuator bearing.
scientia non olet · About LEMON Manuals