LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Engine Start Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Clutch Pedal Position Switch Electrical Connector
    GM776950Courtesy of GENERAL MOTORS CORP.
  1. Install the clutch pedal position switch to the pushrod with the plastic tabs.
  2. Connect the clutch pedal position switch electrical connector (1).
scientia non olet · About LEMON Manuals