LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Replacement (ZF S6-650 Transmission) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission. Refer to Transmission Replacement in Manual Transmission - ZF S6-650.
  2. Remove the clutch actuator cylinder bolts.
    3. Fig 1: Clutch Actuator Cylinder (ZF S6-650 Transmission)
    GM776228Courtesy of GENERAL MOTORS CORP.
  3. Remove the clutch actuator cylinder.

    If required, the clutch release bearing can be removed from the clutch actuator cylinder for replacement.

scientia non olet · About LEMON Manuals