Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .

CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.

Using compressed air, blow any debris from around the fittings.

Fig 1: Blowing Dirt Out Of Fitting (Plastic Collar)

Courtesy of GENERAL MOTORS CORP.

Squeeze the plastic retainer tabs together.

Fig 2: Squeezing Quick Connect Fitting Release Tabs (Plastic Collar)

Courtesy of GENERAL MOTORS CORP.

Pull the fuel line connection apart.

Fig 3: Pulling Connection Apart (Plastic Collar)

Courtesy of GENERAL MOTORS CORP.