LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 977 (Engine Controls - 6.6L (LLY) (Introduction)) >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (1).
    Fig 1: Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Electrical Connector
    GM877698Courtesy of GENERAL MOTORS CORP.
    2. Fig 2: Air Cleaner Housing Assembly
    GM858229Courtesy of GENERAL MOTORS CORP.
  2. Loosen the screws holding the air cleaner housing halves together.
  3. Separate the housing halves and remove the air filter element.
scientia non olet · About LEMON Manuals