LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Engine Controls - 6.6L (Lb7) (Introduction)) >> Repair Instructions >> Fuel System Cooler Replacement (Cab/Chassis) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Relieve the fuel pressure.
  3. Disconnect the fuel pipes from the fuel cooler (1). Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  4. Remove the fuel cooler nuts (2).
  5. Remove the fuel cooler (1).
    6. Fig 1: Fuel System Cooler (Cab/Chassis)
    GM737641Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals