LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Engine Controls - 6.6L (Lb7) (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement (Chassis to Tank) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Pickup)  or Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear) .
  2. Disconnect the fuel lines from the sending unit. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Disconnect and remove the fuel lines from the clips (3) on the fuel tank.
    4. Fig 1: Fuel Tank, Sending Unit & Retaining Clips
    GM738174Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals