Vehicle Speed Sensor: Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Install the O-ring seal (3) on the vehicle speed sensor (1). Coat the O-ring seal (3) with a thin film of transmission fluid. Install the vehicle speed sensor (1) into the transmission case. See Figure . Install and tighten the bolt to specification. See TORQUE SPECIFICATIONS . Connect the wiring harness electrical connector to the vehicle speed sensor. Fill transmission with appropriate fluid to proper level. See LUBRICATION .