LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Automatic Transmission Servicing) >> Removal & Installation >> Extension Housing Assembly >> Removal

Extension Housing Assembly: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Support the transmission with a transmission jack. Place a drain pan under the vehicle.
  2. Remove the propeller shaft. See appropriate DRIVESHAFT & UNIVERSAL JOINTS article in DRIVE AXLES. Remove the transmission mount.
  3. Remove the case extension bolts (1). Remove the case extension (2). See Figure . Remove and discard the case extension O-ring seal (3).