LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Automatic Transmission Servicing) >> Removal & Installation >> Extension Housing Assembly >> Installation

Extension Housing Assembly: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new case extension O-ring seal (3). Install the case extension (2). Install the case extension bolts (1). See Fig 1 .
  2. Tighten the case extension bolts (1) to specification. See TORQUE SPECIFICATIONS  .
  3. Install the transmission mount. Install the propeller shaft. See appropriate DRIVESHAFT & UNIVERSAL JOINTS article in DRIVE AXLES.
  4. Remove the drain pan and the transmission jack. Lower the vehicle. Fill transmission with appropriate fluid to proper level. See LUBRICATION  .
Fig 1: Removing & Installing Extension Housing Assembly
G00087663Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals