Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear transmission mount.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the transmission mount bolts.
Tighten: Tighten the transmission mount bolts to 50 N.m (37 lb ft).
- Lower the transmission.
- Install the transmission mount to crossmember nuts.
Tighten: Tighten the transmission mount to crossmember nuts to 54 N.m (40 lb ft).
- Lower the vehicle.