LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 964 (Manual Transmission -- NV 4500) >> Repair Instructions >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the remaining mounts are subjected to abnormally high stresses.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the transmission mount to crossmember nut.
    Fig 1: Removing The Transmission Mount To Crossmember Nut
    GM775038Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Removing The Transmission Mount To Transmission Bolts
    GM772345Courtesy of GENERAL MOTORS CORP.
  3. Remove the transmission mount to transmission bolts.
  4. Raise the transmission just enough, in order to permit removal of the mount using a suitable transmission jack.
  5. Remove the transmission mount.
scientia non olet · About LEMON Manuals