LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (Manual Transmission -- NV 3500) >> Repair Instructions >> Control Lever and/or Boot Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: DO NOT move the shift lever assembly adjustment nut if replacing the control lever.
    Fig 1: Removing The Control Lever
    GM772338Courtesy of GENERAL MOTORS CORP.
  1. Remove the control lever.
    2. Fig 2: Removing The Control Lever Boot Retainer Plastic Retainers
    GM772340Courtesy of GENERAL MOTORS CORP.
  2. Remove the control lever boot retainer plastic retainers, if necessary.
  3. Remove the control lever boot retainer, if necessary.
    4. Fig 3: Removing The Control Lever Boot Retainer
    GM772341Courtesy of GENERAL MOTORS CORP.
  4. Remove the control lever boot screws, if necessary.
  5. Remove the control lever boot, if necessary.
  6. Remove the control lever insulator, if necessary.
scientia non olet · About LEMON Manuals