LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Antilock Brake System And Traction Control System) >> Diagnostic Information and Procedures >> DTC C0550: ECU Malfunction >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Replace the EBCM if this DTC continues to set intermittently.

DTC C0550

Step Action Yes No
1 Did you perform the ABS Diagnostic System Check? Go to Step 2  Go to Diagnostic System Check - ABS 
2 Use a scan tool in order to clear the DTCs.
Can the DTC be cleared?
Go to Step 3  Go to Step 4 
3 Start the engine and allow the engine to idle.
Does the DTC reset?
Go to Step 4  Go to Diagnostic Aids
4
IMPORTANT: Following EBCM replacement, use the scan tool to perform the Tire Size Calibration procedure.
Replace the EBCM. Refer to Electronic Brake Control Module Replacement .Did you complete the replacement?
Go to Step 5  -
5
  1. Use the scan tool in order to clear the DTCs.
  2. Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text.
Does the DTC reset?
Go to Step 3  System OK