LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 960 (Preface, Cautions And Notices) >> Introduction >> Transmission Control Valve Body Overhaul Notice

Transmission Control Valve Body Overhaul Notice

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Transmission damage may occur when control valve assembly springs and other parts are mistakenly interchanged. Interchanging parts can be avoided by observing the following precautions:
    • Tag each part immediately when removed.
    • Use J 33163 Valve Tray Set to organize parts and to simplify correct valve body reassembly.
  • Protect control valve assembly parts from damage by observing the following precautions:
    • Handle all valves carefully.
    • Protect control valve assembly parts during removal, cleaning, inspection, and assembly.
    • Keep the parts in a clean container until the parts are installed.
  • When a valve is installed dry, the weight of the valve is sufficient to move the valve through the valve bore. If a valve does not move freely, the transmission may be damaged.
scientia non olet · About LEMON Manuals